ITAA questions and answers

Using a switch with 2 subnets

Sat, 07 Nov 2009 09:05:21 +0000

Is it possible to use a switch with 2 subnets?

The application is VoIP and data to run on 2 different subnets which have separate dedicated Broadband lines. The two Broadband routers will be connected to the same switch.

Is it possible to route the VoIP traffic to the Broadband router and data traffic to the data router using a switch?

The switch I intend to use is the Netgear FS728TP as it has PoE on all 24 ports and VoIP prioritisation.

Thanks.

Networking

ryanlacdao — Thu, 29 Oct 2009 19:51:23 +0000

I've been with IT for more than 8 years now and I'm planning to cement my specialization by getting a certification. What would be the best route or the most needed certifications out there that can really be usefull and valuable?

Thanks.

Web site testing tool

Wed, 28 Oct 2009 21:52:52 +0000

Can you recommend a good basic web site testing tool that would allow us automate daily checking that all our web site pages are in place? Ideally it would be something a non-programmer could use.

juniper certification (JNCIS-JUNOS)

imfiaz — Tue, 27 Oct 2009 07:02:30 +0000

HI to all!

anybody help me how to clear JNCIS-JUNOS EXAM, anybody have material on this,
plz help me, i have to clear (pass) this exam

Thanks in advance.....

GMail SMS Chat Reset

Wed, 21 Oct 2009 18:30:56 +0000

Late last year Google gave us Google SMS chat... YEAH! This allows me to reach my kids via Google Chat even if they're offline (but attached to their cell phones, as they always are).

I wonder if you have any insight on a recurring problem (at least if blog/forum posts are any indication, http://groups.google.com/group/Gmail-Help-Chats-and-Contacts-en/browse_thread/thread/fafc6bc293eea8ed and http://www.google.com/support/forum/p/gmail/thread?tid=4a55654181787188&hl=en)....

Read more

Lan design

Sun, 18 Oct 2009 08:00:02 +0000

I want to make a small business lan consisting of 3 building, main office and two residential out buildings with 10 pc in each. High speed internet is the main requirement also some residents have need for wifi due to laptops. The max distance between building is 50mtrs. Redundance is a consideration the must be factored in to the design. I need two options low end and high end. Plus it need to be upgradeable looking forward.

reduce CCNA cost

Sat, 17 Oct 2009 02:57:12 +0000

Hi,

I want to acquire a CCNA cert with minimal cost, I can read and practice on my own ,, but my concern is that,, I found on cisco's website that I can take either CCNA exam for $250 or ICND1+2 for $125 ,, but still will be granted the same CCNA credentials,, am I right with my reading?? and whats the point of doing a $250 exam while you can go for the same for $125 only?

I am concerned that I might be wrong ,,and I dont want to waste money and time ,,so please advice me on this ,, I need that ccna ,,and how can I reduce the total cos

wirelss connection problem

cindy11byt — Fri, 16 Oct 2009 22:29:36 +0000

I have a Vostro 1000 Dell, and I have wireless in my home but everytime I try to connect on my laptop it won't even find the wireless network. I know that the router is working because my kids connect online on the PS3. Can you help me please!!!

Passed CCNA (icnd1 & icnd2) what next?

fran7802 — Sat, 10 Oct 2009 19:57:51 +0000

I have just passed my ccna ,im thinking or following through with my CCNP ,however ive been looking into CCNA SECURTY OR VOICE....Im not quite sure which to do next ,i do eventually want the CCNP ,but which would be the best way to do it? There is alot going on in the voice world ,so i dont want to miss out on VOIP. Should i rather do the CCVP?

Call Manager Overhead Paging

config6 — Thu, 08 Oct 2009 18:14:39 +0000

I have an enterprize system and having problems with overhead paging. I would like to know how to program a 3 digit code to access a static IP address that is setup for a Valcom 801 paging interface.

Any help would be appreciated.
Thanks