- 15 Non-Certified IT Skills Growing in Demand
- How 19 Tech Titans Target Healthcare
- Twitter Suffering From Growing Pains (and Facebook Comparisons)
- Agile Comes to Data Integration
Network World - A little-known standard for real-time network monitoring is proving to be a valuable tool for some users of high-speed networks.
Although the IETF's sFlow draft standard has been available for years, few vendors have implemented it. But as network traffic speeds grow to gigabit and 10G in some corporations, sFlow will become a more important technology for tracking network performance and providing network security, experts and users say.
SFlow, which the IETF approved as a draft standard in 2001, is a technology that uses random sampling of LAN and WAN data packet flows across an entire network to give users a detailed, real-time view of network traffic performance, trends and problems, according to Foundry Networks and HP. Both offer sFlow-based switches.
Typically, network monitoring is accomplished by putting a network probe device - such as a PC running probe software or an appliance - onto a segment of a network to collect data. The probe is often plugged into a mirrored port on a LAN switch - a port configured to duplicate traffic from another port on the switch. The probe will be able to collect traffic data only from the mirrored port.
SFlow is deployed through network management information bases (MIB) - either hardware-based or software-based agents - running on the actual switches and routers in a network. This allows for a broader picture of network performance, sFlow backers say; monitoring happens on every port of every sFlow-enabled switch, rather than on just the port or segment a probe is attached to. Proponents of sFlow say the technology allows for more widespread network monitoring because mirroring every port would be burdensome for both network staff and LAN bandwidth - half a switch would have to be dedicated to port mirroring to achieve this.
Instead of capturing and logging every packet on a switch or router port, sFlow MIBs take random samples of packets traveling through ports. These samples, called sFlow datagrams, are forwarded to an sFlow collection server on a network. On this box, the datagrams are run through an algorithm that generates a complete model of network traffic based on the sampled data.
The technology behind sFlow was developed jointly by engineers at InMon, a maker of switch-monitoring software, and developers at HP and Foundry Networks. Vendors that incorporate sFlow technology in their LAN switches include HP, Foundry and Extreme Networks. Software support for sFlow is included in products such as HP OpenView, NetScout's nGenius Performance Manager and InMon Traffic Server.
At The Moffit Cancer Center in in Tampa, Fla., Foundry switches with sFlow are used to measure network performance and as a security tool.
"SFlow gives us real-time [network] statistics," on every port in the network, says David Bratt, senior technical architect at the center.
"The level of detail on traffic patterns is excellent, right down to the protocol and port level," Bratt says. "If you have someone doing something wrong on the network, you can track them down right to where their PCs is plugged in," he says.