Wi-Fi troubleshooting gets easier, more portable

Fluke's AirCheck packs a simple UI and easy-to-read-understand radio diagnostics into a handheld Wi-Fi tester

It's not being advertised as Wi-Fi testing for dummies, but in a sense that's part of the thinking behind Fluke Networks' cool handheld radio troubleshooter.

The AirCheck Wi-Fi Tester looks like an oversized DVD controller with display screen to help network technicians who aren't RF engineers quickly diagnose a range of common wireless LAN problems.

WLAN sniffers pass the sniff test

To continue reading, register here and become an Insider. You'll get free access to premium content from CIO, Computerworld, CSO, InfoWorld, and Network World. See more Insider content or sign in.

It's not being advertised as Wi-Fi testing for dummies, but in a sense that's part of the thinking behind Fluke Networks' cool handheld radio troubleshooter.

The AirCheck Wi-Fi Tester looks like an oversized DVD controller with display screen to help network technicians who aren't RF engineers quickly diagnose a range of common wireless LAN problems.

WLAN sniffers pass the sniff test

Traditionally, RF diagnostic hardware and software has been complex and costly, aimed at engineering-level RF experts. More recently, laptop-based applications (commercial or freeware like NetStumbler) that make use of a computer's onboard Wi-Fi adapter have somewhat simplified troubleshooting, but they're awkward to use. Fluke even bought one of the pioneers in this area of Wi-Fi monitoring and packet analyzing, AirMagnet, in 2009. 

"They had the same hole we did," says Mark Mullins, business development manger for Fluke, which makes handheld testing and diagnostic gear for wired networks. "There was nothing really convenient for front-line technicians. Today, it's a hodge-podge of relatively complicated stuff."

A truly handheld tool, designed for easy use and fast diagnostics, would let these technicians figure out and fix much faster a range of common Wi-Fi problems, including something as basic as pinpointing whether the problem was in the client radio or the access point.

AirCheck is Fluke's solution, developed over the past two years. The first-of-its-kind handheld is 3.5 inches wide, 7.8 inches long, and 1.9 inches thick, weighing 14 ounces, and sporting a 2.8-inch color LCD screen with a 320 x 240 pixels resolution (one-quarter VGA).

No one will mistake it for an iPhone, but it can fit into a fairly capacious and sturdy pocket (a belt clip and a lanyard loop would give users additional options). It has an optional directional antenna (a unit that plugs into the back of the device) for more quickly hunting down a Wi-Fi radio's location.

AirCheck scans all 802.11 networks, including 802.11n, and can identify the Wi-Fi security settings for each radio, whether it's wide-open, or using Wired Equivalent Privacy, WPA2, 802.1X and so on. The device uses a standard Wi-Fi chipset, but Fluke's designers modified the drivers and the antenna.

Fluke talked extensively with network technicians while designing AirCheck. They didn't want to stand around waiting for the device to boot up. The removable, rechargeable lithium-ion battery, with 5 hours of operation, powers up the device in less than 3 seconds.

The user interface was designed for simplicity and fast navigation. For the most part, there are no menus. The start screen gives you four immediate selections to choose from: networks, access points, channels and tools. The navigation and select buttons let you quickly move through lists and select an element.

Clicking on "networks" shows a list of all SSIDs in range. Clicking on any one of them shows a list of the nearby access points, and an array of information about them such as the RF channel they're using, signal level, access point name or media access control address, and security or encryption settings.