Skip Links

Building your first desktop PC

Next time you need a desktop, building your own might be the way to go

By , Network World
August 23, 2012 01:15 PM ET

Network World - I've long been curious about the process of building a computer from scratch, and, a couple of weeks ago, I finally took the plunge. While I was expecting a tortuous and highly technical process, the actual experience was far less painful.

building a PC

BUILDING A PC: Safety tips and handy online resources

SHOPPING LIST: My components

With careful component research, a few invaluable online resources and some very helpful experts, I was able to sketch out an excellent machine with comparatively little fuss -- and probably for a lot less money than would have been required for a professionally constructed device. I wound up with an Intel Ivy Bridge Core i5 processor, a beefy Nvidia GTX 670 graphics card and a case that looks a little like a missile silo. Although I overbought a little bit, I still managed to pay less than $1,400 for the whole package. By comparison, Alienware's full-sized gaming desktop line starts at $1,500, and a machine equipped similarly to mine would quickly surpass the $2,000 mark.

building a PC

So, after acquiring all the parts I wanted, I sat down on my apartment's hardwood floor and -- somewhat unexpectedly -- put together a complete desktop PC in just a few hours.

One thing that surprised me about the whole process was how few specialized tools were needed. While desktop computers are very complex indeed from an electronic standpoint, they're mechanically quite simple, and many components are highly standardized. All I really needed was a good set of screwdrivers, and even then, most parts of my build simply plugged into each other. The only things that needed to be screwed into place with an actual screwdriver were the power supply and the motherboard, thanks to my case's use of tool-less bays for the various disk drives. (I did have to use one to mount a solid-state drive to an adapter for its drive bay, though.)

building a PC

I don't want to give the wrong impression, however -- there were a couple of scary moments. The first was early in the building process, when I had to lock the CPU into place on the motherboard. Every set of instructions I'd read about installing processors emphasized the extreme importance of not bending the forest of little contacts on the underside of the device and being as gentle as possible when putting it in its socket. After the processor was delicately seated, however, I had to fix the thing into place with what looked a lot like a locking bar on an old mousetrap -- and required a similar amount of pressure. Yipes.

"Trying not to break anything" was the common theme for my nervous moments with the new machine, actually -- the motherboard's main power connector also required a frankly alarming amount of force to get into its socket, and I was sure that the board itself would crack under the strain.

building a PC

Seating the big EVGA GeForce GTX 670 into its place -- I bought the machine partially for gaming, so this was a key component -- also confounded me briefly. It took me some time to figure out that there was a little plastic locking tab that had to be pushed back before the device would fit onto the motherboard, and even then, it took a little bit more pressure than I was comfortable with to make it line up precisely with the expansion slot at the back of the case. (To be clear, I'm told that all this is relatively common, but it didn't prevent me from worrying at the time.)

Our Commenting Policies
Latest News
rssRss Feed
View more Latest News