- 18 Hot IT Certifications for 2014
- CIOs Opting for IT Contractors Over Hiring Full-Time Staff
- 12 Best Free iOS 7 Holiday Shopping Apps
- For CMOs Big Data Can Lead to Big Profits
IDG News Service - Researchers at the University of South Carolina have discovered that some types of electricity meter are broadcasting unencrypted information that, with the right software, would enable eavesdroppers to determine whether you're at home.
DEAD END: 2012 Tech Industry Graveyard
The meters, called AMR (automatic meter reading) in the utility industry, are a first-generation smart meter technology and they are installed in one third of American homes and businesses. They are intended to make it easy for utilities to collect meter readings. Instead of requiring access to your home, workers need simply drive or walk by a house with a handheld terminal and the current meter reading can be received.
While many gas and water AMR meters continuously listen for a query signal from a meter reading terminal and only transmit a reading when requested, the researchers found at least one type of electricity meter works on the opposite principle. It continuously sends a meter reading every 30 seconds around the clock.
"We had heard a lot about smart meters, about how great and how efficient they were," said Wenyuan Xu, an assistant professor at the University of South Carolina, speaking to IDG News Service. "We thought about privacy and wondered how secure are they meters currently in use."
It turns out, not very.
The tools were simple: a $1,000 Universal Software Radio Peripheral software-defined radio, an amplifier, and the freeware GNU Radio software, plus of course, the team's knowledge of wireless protocols and data processing.
The first job was capturing the data. The team found that the meters transmit every 30 seconds by hopping through a number of frequencies, but the cycle of frequencies chosen isn't random so the pattern can be predicted.
Then, with just a few days work, Xu and her team were able to deconstruct the proprietary protocol used by the meters thanks to documentation they found on the Internet and information freely disclosed by meter makers.
"Once we got the raw signal, we processed it, and reverse engineered it," she said.
Using an off-the-shelf antenna and amplifier, the researchers were able to capture packets from electricity meters at a distance of up to 300 meters. In the neighborhood where they tested, they were able to receive packets from 106 electric meters.
The data sent was in plain text and carried the identification number of the meter and its reading. The name of the home owner or the address aren't included, but anyone motivated enough could quickly figure out the source.
"The meter ID was printed on the front of the meter we looked at, so theoretically you could read the ID [off a target meter] and try to sniff packets," Xu said.
In her tests, Xu found she was able to pull packets out of the air from target meters between once every 2 to 10 minutes. That's fast enough to be able to work out the average power consumption of a house and notice start to deduce when someone is at home.