Skip Links

Vulnerable terminal servers reflect bigger security problem

Unsecured ports on industrial control equipment, which could let hackers gain admin access, highlights risk of older equipment on modern tech

By Antone Gonsalves, CSO
April 26, 2013 08:41 AM ET

CSO - Security weaknesses uncovered in terminal servers used to provide an Internet connection to a wide variety of business and industrial equipment exemplify the risk inherent in adapting older systems to modern technology, experts say.

[ALSO: 15 free security tools you should try]

A recent study by the security firm Rapid7 found more than 114,000 terminal servers, mostly from Digi International or Lantronix, configured to let anyone gain access to the underlying systems. A terminals server, also called a network access server, makes any equipment with a serial port accessible through the Internet.

The systems found vulnerable to tampering included industrial control equipment, traffic signal monitors, fuel pumps, retail point-of-sale terminals and building automation equipment. A hacker scanning the Internet for the serial ports on these devices could easily use a command line program to gain administrative privileges and control the equipment.

The problem largely stems from companies failing to set up strong authentication measures. Rather than requiring a strong password, the equipment is left using the manufacturer's default password -- or no authentication at all.

While just setting up proper authentication would fix the problem in most cases, the reason why that does not happen is more complicated. For example, terminal servers are often added to heating, ventilation and air conditioning equipment and building security systems by a third-party or people within the organization other than IT security pros.

As a result, the latter may not even know the servers exist, said Matthew Neely, director of research at risk management company SecureState. Making matters worse, if the equipment is not properly inventoried, then the servers are soon forgotten.

In general, adding security to control systems, whether used in businesses or manufacturing, is difficult and often adds a layer of complexity that the underlying systems were not originally built to handle.

"There is often a tendency not to deploy [security] because it impacts functionality," said Joe Weiss, a security consultant for Applied Control Solutions.

[Also see: U.S. seeking to build international unity around cyberdefense for industrial control systems]

Vendors also can add to the problem by marketing equipment as secured, when in reality they are just capable of being secured, which means the buyer has to add the necessary technology. Another scenario is the vendor will send equipment with all the security mechanisms turned off, leaving it to the buyer to turn it on.

"Without being flippant, a lot of times people don't look, because the box says it's secure, so they assume it is plug-and-play," Weiss said.

A problem specific to terminal servers is often seen in electric utilities, he said. Federal cybersecurity requirements for the power industry exclude serial port servers, so they are often skipped by utilities, since the servers would not be on their compliance checklist.

"They don't even have to look for these [servers]," Weiss said.

Our Commenting Policies
Latest News
rssRss Feed
View more Latest News