Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Cisco ATM Multiservice Switching (ATMMS) Test #1

Covers objectives for the Cisco ATM Multiservice Switching exam (9E0-911), which counts towards the CMSS WAN certification.

The following information provides general guidelines for the content likely to be included on the ATM Multiservice Switching exam. However, other related topics may also appear on any specific delivery of the exam.


 

WAN Quick Start
Describe the characteristics of narrowband lines (T1 and E1)
Describe the characteristics of broadband lines (T3, E3, SONET, and SDH)
Identify and describe Frame Relay frame fields
Identify and describe ATM cell header fields
Describe ATM Adaptation Layers (AAL)


 

Installation of Cisco WAN Switches
Identify the roles and capabilities of Cisco WAN switching products in an integrated multiservice network architecture
Describe the system software features and user services support of the BPX 8600 Series switches
Describe the system element and card module features and functionality for the MGX product family
Identify the pre-installation planning requirements for implementation of Cisco WAN switches and the CWM NMS
Describe the system element and card module features and functionality for the BPX 8600 Series switches
Describe the actions and associated CLI commands for initial software configuration of BPX nodes
Describe the system element and card module features and functionality for the MGX product family
Describe the actions and associated CLI commands for initial software configuration of MGX nodes
Identify the process for implementing network trunking for AutoRoute, PNNI, and hybrid networks
Describe the processes employed for system software and firmware maintenance in WAN switch networks


 

BPX Switch and Services Configuration
List and describe the features supported by the BPX switch
Identify the cards in the BPX switch and the functions of each
Describe BPX trunks and configurable trunk characteristics
Identify the steps, the commands, and the parameter selections to configure ATM lines.
Identify the steps, the commands, and the parameter selections to configure ATM ports
Describe the ATM policing process
Create ATM connections with or without connection classes
Describe the AutoRoute routing function


 

MGX ATM Concentrator Configuration
Identify the cards in the MGX switch and the functions of each
Describe the MGX CLI and command syntax
Describe the procedure for attaching an MGX feeder to the ATM backbone network
Identify the steps, the commands, and the parameter selections to configure service module lines
Identify the ATM connection type required in the backbone network to support an MGX feeder connection
Identify the steps, the commands, and the parameter selections to configure circuit emulation services on the CESM
Identify the steps, the commands, and the parameter selections to configure Frame Relay ports on FRSM
Identify the steps, the commands, and the parameter selections to configure Frame Relay connections on FRSM
Identify the steps, the commands, and the parameter selections to configure ATM ports on AUSM
Identify the steps, the commands, and the parameter selections to configure ATM connections on AUSM
Identify the steps, the commands, and the parameter selections to configure voice over AAL2 services on VISM
Describe RPM features


 

Cisco WAN Manager (CWM) Installation and Operations
Define the role of the CWM NMS as part of an integrated management system fin a Service Provider environment
Identify the underlying principles and functional components on which the CWM system architecture is based
Describe the usage of the features and capabilities of the management applications provided in the CWM NMS
Identify the system requirements for the CWM NMS
Describe the process for installation and configuration of the CWM NMS station and ancillary systems, including the SNMP Proxy agent and the Standalone SCM
Describe the network topology and discovery process for AutoRoute, PNNI, and hybrid networks
Describe the process for configuration of CWM system files and switch parameters required for CWM management of hybrid switch networks
Describe the usage of CiscoView for network element configuration management
Given specific requirements, describe the usage of the Connection Manager and Service Class Template Manager in provisioning user services based on PVCs, SPVCs, hybrid PVCs, and XPVCs
Describe the usage of the Statistics Collection Manager and reporting applications in performance and accounting management
Describe the usage of the Security Manager application in controlling user access to the CWM NMS applications and databases

About the Practical Exam

Vendor Exam #:
9E0-911
Time for Exam:
Passing Score:
Total Questions:
Certification:

Registration Phone #:
 
Download Sites

FREE
DOWNLOAD:
USA 1 Click here

Boson Author Information:

Boson Test #1 part number is: 70204
The author of test #1 is neal@boson.com
Neal O’Horo has worked as a service provider CCSI for Sequoia Networks, LLC a Cisco Learning Partner based out of San Jose, CA since April 2001. He currently teaches the Gigabit Switch Router (GSR), Installing Cisco WAN Switches (ICWS), BPX Switch Services Configuration (BSSC), MGX Concentrator Configuration (MACC), MGX ATM Edge Switch Configuration (MAESC), Implementing Multiprotocol Label Switching (IMPLS), Advanced ATM PNNI Routing and Switching (AAPRS), Service Expansion Shelf PNNI Controller Configuration (SESCC), Configuring BGP on Cisco Routers (CBCR), and Advanced MPLS and VPN Solutions (AMVS). He has extensive experience with PNNI and MPLS. His certifications include: Cisco Multiservice Switching Specialist (CMSS), CCSI, CCNP, CCDP,MCSE, MCT, A+ and Network +. Before Sequoia, Neal worked for 12 years in the US Army as a communications specialist working a variet
Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Error 404--Not Found

Error 404--Not Found

From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

10.4.5 404 Not Found

The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

**