- 15 Non-Certified IT Skills Growing in Demand
- How 19 Tech Titans Target Healthcare
- Twitter Suffering From Growing Pains (and Facebook Comparisons)
- Agile Comes to Data Integration
Network World - The Cisco UCS E-Series family is a new set of blades that add high-performance general-purpose Intel server capabilities to the ISR G2 series of routers.
We tested the E140D, a mid-range blade, and found it to be a speedy, well-designed, easy to manage and good performing server — all stuffed inside of our existing Cisco 3945 ISR G2 branch office router.
Network managers who need general-purpose computing capability will find the UCS Express to be a convenient and tightly integrated device for branch office deployments.
[ALSO: 15 more useful Cisco sites
However, server managers will have to be convinced to abandon their stand-alone servers, as the UCS E-Series comes at a relatively high cost and doesn't offer the expandability or configuration flexibility of traditional offerings.
Introducing UCS Express
Cisco has a long history of putting general-purpose computers inside its routers. Initially, these add-in blades were devoted to specific tasks, such as running Cisco Call Manager software. The precursors to the UCS Express blades were SRE (Service Ready Engine) blades, running specific qualified applications developed by Cisco and other third-party vendors.
Cisco currently offers three UCS E-Series blades, a single-wide and two double-wide versions.
The Cisco UCS E-Series 140S (S for "single") has a four-core Intel CPU and is a single-wide blade, meaning that it takes a normal-size service module slot in an ISR G2 router — that's half as wide as the router. You get one single-wide slot in the Cisco 2911, a double-wide slot in the 2921, 2951 and 3925, and two double-wide slots in the 3945. Because the 140S is only about 7 inches wide, it has a more restricted configuration of hard drives (maximum of two 2.5-inch drives) and memory (maximum of two DIMMs, 16GB) than the double-wide versions.
The other two models are both double-wide blades. The Cisco UCS E-Series 140D (we tested a beta version of the 140D) and 160D are four-core and six-core double-wide blades. With a little more real estate, these come with three DIMM slots (up to 48GB of memory) and three 2.5-inch drive bays. If you want to put more than one of these in a chassis for some reason, there's a complicated set of rules about how many UCS E-Series servers will fit in ISR G2, considering space, cooling and power requirements, available on the Cisco website.
Booting up UCS Express
Getting started takes a little rethinking because two of the Ethernet ports on the UCS E-Series blades are internal to the ISR G2 router. Rather than connecting all four of the Ethernet interfaces to the network, we connected the two physical interfaces, and then went into the ISR G2 command line to control the two internal interfaces. Once you figure all this out — which takes about 30 minutes, tops — then testing UCS E-Series is a breeze.