- Is the Cisco MARS mission going to abort?
- First iPhone worm spreads Rick Astley wallpaper
- 10 stunning 3D buildings made with Google SketchUp
- Open source software ready for big business
- Four reasons to buy (and one reason to avoid) the Droid
![]() |
![]() |
When it comes to flexible enterprise storage, the University of Florida College of Veterinary Medicine doesn't horse around. Over the last six months, the college has been putting its 7TB storage area network through its paces, using it for nearline backup and primary storage, and has this insight to share: Storage virtualization is the cat's meow.
Virtualization drives advances in storage management
5/02/07
The tale begins in late 2005, with UFCVM trying to cope with staggering volumes of advanced, multimedia diagnostic data. The college treats tens of thousands of animals each year -- in 2006 it handled more than 40,000 cases, it says. The pain point was backups: The window required for nightly backups to tape had begun to outstrip the time available to complete them.
To fix the problem, IT staff knew they wanted a nearline, disk-based SAN. They considered the usual proprietary storage vendors and realized their $100,000 budget wouldn't go very far, says Sommer Sharp, systems programmer for UFCVM, in Gainesville, Fla.
So Sharp decided to piece together storage capacity from affordable vendors and write the management pieces in-house. Then she learned of Storage Virtualization Manager (SVM), a virtualization appliance from StoreAge Networking Technologies, now owned by LSI.

SVM, which sits between a company's servers and the SAN (or SANs), takes low-volume snapshots of production data and sends them simultaneously to nearline backup disks and tape libraries. Because it operates outside the data path, it does not drag performance down, its maker says. It also lets storage volumes be moved among SANs regardless of the brands of the servers or storage devices involved. In this way, it creates a single, flexible pool of storage.
The college's SAN setup is a little unusual, too. The servers use iSCSI to communicate with their allocated space on the SAN, but the storage, Nexsan Technologies' SATABlade systems, uses Fibre Channel to work with the SAN's control appliances. These include the SVM, as well as a Troika Accelera switch (now QLogic's SANbox 8000).
The Accelera translates iSCSI commands, such as presenting the logical unit number to the server. Meanwhile, Sharp can use the servers' Microsoft iSCSI software, negating the need to put third-party SAN software on them. The setup is virtual and economical. "We went with the SATABlades due to cost but have been impressed with their performance," she says.
The operation was successful: The SAN reduced backup times by half, and the project came in under budget, she says.
It was later that the SAN grew really interesting, however. Even though LSI Logic bills SVM as a backup device, within a few months Sharp began to see that, because of the virtualization, she no longer needed to distinguish between inline and nearline storage.
Provisioning is a painless matter of moving volumes to any server that needs it, so live data can be managed as easily as backups. UFCVM went to town. Within the last six months, it has filled 5TB of the SAN's 7TB capacity with live data. It uses 500GB for nearline backup space, but backups also are dumped immediately to tape.
Partner Content
www.bmc.com
Gartner 2009 Magic Quadrant for Job Scheduling
Gartner has positioned BMC CONTROL-M in the Leaders Quadrant of their "2009 Magic Quadrant for Job Scheduling." The report assesses the ability to execute and completeness of vision of key vendors in the marketplace. Read a full copy today, courtesy of BMC Software.
Download whitepaper
Dell's SMART Approach to Workload Automation
Read a compelling case study by EMA, Inc. to learn how Dell uses BMC CONTROL-M to cut cost and increase productivity with workload automation.
Download whitepaper
Workload Automation Cost Savings 2 Minute Video
A major computer manufacturer uses BMC CONTROL-M and just four people to schedule and run over 85,000 jobs every month. By switching to BMC CONTROL-M, they more than quadrupled the workload without adding a single staff member. See how in this 2-minute video overview.
Go to video
Comment