No iPhone bumpers here, NASA revamps historic 9 million lb Mars antenna

NASA does some joint replacement on its Deep Space Network antenna

nasa mars antenna gets some joint help
The ubiquitous antenna was all the buzz last week as Apple tried to squelch the latest glitch in its popular iPhone.  But those antenna issues have nothing on the renovations NASA is taking on to reinvigorate its 70-meter-wide (230-foot-wide) "Mars antenna."

The antenna, a key cog in NASA's Deep Space Network, needs about $1.25M worth of what NASA calls major, delicate surgery. The revamp calls for lifting the antenna -- about 4 million kilograms (9 million pounds) of finely tuned scientific instruments - to a height of about 5 millimeters (0.2 inches) so workers can replace the steel runner, walls and supporting grout. This is the first time the runner has been replaced on the Mars antenna, NASA said.

NASA amps up wicked cool competitive prize program

The operation on the historic 70-meter-wide (230-foot) antenna, which beamed data and watched missions to deep space for over 40 years, will replace a portion of what's known as the hydrostatic bearing assembly. This assembly enables the antenna to rotate horizontally, NASA stated.

According to NASA, the bearing assembly puts the weight of the antenna on three pads, which glide on a film of oil around a large steel ring. The ring measures about 24 meters (79 feet) in diameter and must be flat to work efficiently. After 44 years of near-constant use, the Mars antenna needed a kind of joint replacement, since the bearing assembly had become uneven, NASA stated.

A flat, stable surface is critical for the Mars antenna to rotate slowly as it tracks spacecraft, NASA said.  Three steel pads support the weight of the antenna rotating structure, dish and other communications equipment above the circular steel runner. A film of oil about the thickness of a sheet of paper -- about 0.25 millimeters (0.010 inches) -- is produced by a hydraulic system to float the three pads, NASA stated.

The repair will be done slowly but is expected to be done by early November. During that time, workers will also be replacing the elevation bearings, which let the antenna track up and down from the horizon.

Meanwhile the network will still be able to provide full coverage for deep space missions by using the two other 70-meter antennas at Deep Space complexes near Madrid, Spain, and Canberra, Australia, and arraying several smaller 34-meter (110-foot) antennas together, NASA stated.

While officially known as Deep Space Station 14, the antenna got its Mars moniker from its first mission: tracking NASA's Mariner 4 spacecraft, which had been lost by smaller antennas after its historic flyby of Mars, the space agency stated.

Follow Michael Cooney on Twitter: nwwlayer8  

Layer 8 Extra

Check out these other hot stories:

Air Force streamlines cybersecurity hiring for 680 open positions

Safety a big target in letting unmanned aircraft in national airspace

NASA Hubble spots one hot comet-like planet

DARPA issues call for computer science devotees

NASA's Juno: An armored tank heading for Jupiter

NASA adds $5M prizes for cool robots, satellites and solar spacecraft

Researchers unsheathe new tool to battle botnets

Boeing shows off hydrogen powered unmanned aircraft

Researchers tout new weapon in Internet censorship arms race

US R&D: 27 Million Workers; $11 trillion in sales

Military wants Holy Grail of secure encryption technology

NASA's future Mars rover will be better equipped to find Martian life

NASA goes Lunar with online video game

"Help, I am stranded!" scam haunting social networks

Cloud computing exacerbates government security issues       

NASA sets date for space shuttle finale

What are the biggest barriers to developing wind energy?

Join the Network World communities on Facebook and LinkedIn to comment on topics that are top of mind.

Copyright © 2010 IDG Communications, Inc.