Vyatta adds VPN capability to its open source router

Linux-based router company says its router/firewall/VPN code matches Cisco, Juniper offerings

Vyatta is adding VPN support to the latest release of its open source router/firewall product. Vyatta says with its IPSec VPN function, combined with stateful firewall and advanced routing features, OFR provides a complete one-box alternative to routing/firewall/VPN boxes from Cisco and Juniper for small and midsize companies.

Launched this week, Vyatta's Subscription Edition 2.0 of its Open Flexible Router (OFR) includes site-to-site IPSec VPN capabilities, letting users establish secure VPN tunnels between a company headquarters and remote offices. Similar to commercial small and midsize or other open source enterprise products, Vyatta's OFR 2.0 software can be downloaded for free, but costs $497 for a one-year support subscription, which includes software updates and patches, technical support and troubleshooting. The Linux-based OFR code can also be preloaded onto Dell PowerEdge server hardware, starting at $1,797.

OFR is based on the Debian Linux distribution and the eXtenseible Open Router Platform (XORP), an open-source IP routing stack. New to the OFR package is code from the open-source project Open Secure WAN (OpenSWAN), a software package for running IPSec VPNs on top of a Linux.

Version 2.0 of the Vyatta code was beta-tested by KeyMark, a Liberty, S.C.-based document management and automation company with offices in Virginia, Pennsylvania and Indianna. Now the software is supporting a site-to-site VPN between South Carolina and Virginia.

"It's been working flawlessly since we brought it up over a month ago," says David Nalley, network administrator for KeyMark. "It's one of the simplest open-source IPSec configurations I've done," compared to previous open-source IPSec VPN technology, such as FreeSWAN and OpenSWAN, which he has worked with previously, he adds. Listen to the interview (10:52).

KeyMark uses Dell PowerEdge 2950 servers with Gigabit Ethernet LAN ports, and a Sangoma PCI-X T-1 card for connecting to the WAN. (This box replaced a Cisco 1700 series router).

Nalley says it was relatively easy to map the Cisco routing and firewall settings to the Vyatta router configurations. The only issue he encountered during the switch were some configuration problems with frame encapsulation

"There were some things that worked on Cisco that did not work on Vyatta when we first tested it," he says. "But it ended up being more of an issue with the [T-1 card] as opposed to a Vyatta issue."

A useful tool on the Vyatta router is its Web-based interface, which allows IT staff who may not be experienced with Linux or routing command line interfaces to make simple configuration changes if necessary.

"It makes management a lot less intimidating than the command line," even for experience administrators; Vyatta's CLI more resembles Juniper's JUNOS over Cisco's IOS, which Nally himself is more familiar with, he adds.

Since the pre-installed Dell servers with Vyatta did not offer redundant a power supply option, Nalley opted to get his own Dell 2950 serer — with redundant power — and install Vyatta himself.

"This is one of our first experiences with using open-source in a mission critical application and I wanted it to be a success."

Learn more about this topic

Open source router tempts company to bid Cisco firewall farewell

10/2/06

Vyatta to take on Cisco and Juniper

7/24/06

Paving the open source route

12/25/06

Join the Network World communities on Facebook and LinkedIn to comment on topics that are top of mind.

Copyright © 2007 IDG Communications, Inc.

SD-WAN buyers guide: Key questions to ask vendors (and yourself)