See a video using the 3-step MQC process to perform Class-Based Classification and Marking on a router.
In our first lab of the month, we explored the 3-step MQC process, which I suggested might be the most important of all QoS tools. The next three labs delved into the three variants of AutoQoS, which gives us a great initial QoS configuration on a router or switch.
This lab, however, begins a series of labs where we configure very specific QoS mechanisms. Cisco recommends that we classify and mark our traffic as close to the source as possible. We can do that classification and marking using the MQC process. That’s the focus of this video.
Enjoy!
