Foundry is launching its largest Ethernet switch to date at the Interop show this week – a 32-slot, 5.1 terabit-per-second Ethernet switch aimed at high-end data centers and campus LAN backbones. The switch vendor is also expected to announce software which turns Foundry Layer 4-7 switches into antispam and application firewall devices.
Foundry is launching its largest Ethernet switch to date at the Interop show this week – a 32-slot, 5.1 terabit-per-second Ethernet switch aimed at high-end data centers and campus LAN backbones. The switch vendor is also expected to announce software which turns Foundry Layer 4-7 switches into anti-spam and application firewall devices.
Slideshow: Take a closer look at Foundry’s monster Ethernet switch
Foundry’s BigIron RX32 supports up to 128 line-rate 10G Ethernet ports, or 768 ports of 10/100/1000Mbps Ethernet; twice the amount of its previous BigIron RX16, and more than double the number of ports supported in currently shipping high-end gear such as Force10’s TeraScale, Cisco’s Catalyst 6500 and Extreme’s BlackDiamond. Foundry is also introducing TrafficWorks 10.0, which adds Web application firewall and spam-filtering capabilities to the ServerIron 4G switch.
“Customers have come to us because, historically, we’ve sold the biggest, baddest boxes,” says Foundry CEO Bobby Johnson, calling the RX32 the new head of the company’s high-end switch family.
Foundry says its RX32 could be used to collapse an entire LAN backbone or data center into a single chassis (or pair of chassis for redundancy). The device could also run in carrier metro Ethernet edge or core networks, aggregating Ethernet services from customers, or acting as a central hub for MPLS- or VLAN-based Ethernet VPN services.
At almost $200,000 for just the RX32 chassis (no line cards), the BigIron RX32’s market may be select, but it is growing, Johnson says.
“There are a lot of customers who do need this level of performance, scalability, and port density,” he says, such as large university backbones, enterprises involved with data mining, as well as government research laboratories involved in high-performance computing and clustering.
In courting theses types of customers with its new high-end switch, Foundry hopes to gain some headway in the 10G Ethernet market, where it has fallen behind Cisco and Force10 in terms of shipments and revenue, according to research from the Dell’Oro Group.
“This product is a good solid step forward” for Foundry, says Tere’ Bracco, senior research director for enterprise at Current Analysis. The high port count, scale and variety of connection types make it the largest, most versatile core LAN and data center box among competitors in the rarefied market for super-high-density Ethernet boxes.
Bracco cautions that some network managers might be hesitant to install a chassis as new as the RX32 to handle such a large chunk of an enterprise’s network traffic. While the RX32 uses service modules, power supplies and fabric cards from the previous RX16, the chassis itself is new and not as field-tested as the previous-generation BigIron switch.
Network managers, she said, “might feel more comfortable with a chassis design that has some history — if [Foundry] were saying the device has been running in a beta site for nine months, for example.”
Foundry was one of the early market leaders when the 10G Ethernet specification was ratified five years ago. Then its market position eroded on two fronts. First was the emergence of Force10 Networks, with its Terascale switches which scaled far beyond competitive gear from Foundry and others. Then Cisco ramped up its 10G products and market focus with the introduction of high-density fiber and CX-4 copper 10G blades, along with the Supervisor 720’s 720Gbps switch fabric, which allowed it to offer 10G.
Foundry’s introduction of the BigIron RX in 2005 boosted the vendor ahead of Force10, in terms of 10G Ethernet scale.
With 128 line-rate 10G Ethernet ports in the RX32, Foundry is now only behind start-up Woven Systems, which has a box that can top out at 144 line-rate 10G ports. However, Woven’s switch only supports CX-4 copper 10G ports and for the most part, is designed to be deployed in large switch fabrics in Ethernet storage and HPC cluster environments, connecting to other Woven switches. Foundry’s switch supports a variety of connection blades, including four-port 10G fiber XFP modules, 24-port Gigabit XFP blades, and high-density 48-port 10/100/1000Mbps blades.
TrafficWorks 10.0 allows ServerIron 4G switches to enforce Web traffic flow policies which filter out attacks on Web-based applications, Foundry says, such as SQL injection — where attackers enter SQL commands into a Web site URL to gain access to databases, as well as filtering buffer overflow and scripts run against Web application servers.
A ServerIron 4G running TrafficWorks 10.0 can also act as spam filters, as the network device can inspect traffic flows and block messages based on white-list or black-list information. The switches can scan for spam based on 7.5 million IP prefixes, Foundry says. A pair of spam-filtering ServerIron 4Gs in front of a dedicated anti-spam server or appliance could be used to pre-screen traffic for the spam filter (based on basic white/black-list data) and allow spam gear to run more efficiently, Foundry says. The ServerIron 4G could also act as a stand-alone anti-spam box, the company adds.
