• United States

The network 3.0

Dec 04, 20174 mins

Advancements in application awareness, service consistency and simplified management will drive better user experience due to an evolving level of intelligence in all layers of the network.

Credit: Thinkstock

During the past three decades, we have seen a monumental growth in networking technology. From RFC-1163, which describes the beginnings of BGP in 1989 to the cloud and software defined networks of today, our voracious appetite for bandwidth and services have begun to outpace the networking industry’s ability to deliver.

I remember when I had my first “broadband” – and I use that term loosely – circuit installed at my house. It was a 128kbps ISDN line from my local telco. Since it was 1996, I was riding high compared to everyone else using 28.8 kpbs modems to access the internet. Today I have a 1Gbps connection that allows me to stream 4k video from multiple providers. In roughly 20 years, my consumption of bandwidth has increased 8000%!

So, what is enabling this current round of growth and expansion? It boils down to two distinct items:

  1. New and emerging technologies
  2. Software is the new hardware when discussing networking

In the past few years we have seen a rapid rise in everything SD (Software Defined). We have also begun to see extensive work being handled by the IETF to define the new technology standards that will carry us into the future. Let’s look at these advancements.

We’ve seen the rise of SD-WAN through companies like Cisco, CloudGenix, Viptela, Velocloud and Aryaka. There are many more – almost too many to list.

Some of these companies carried us into the world of first generation SD-WAN capabilities. These Gen1 devices were based upon the premise of using a mix of MPLS and commodity internet circuits to deliver services inexpensively for businesses. Some of their features included simple dual VPN service that was secure for business transactions, basic QoS (based upon latency, jitter and loss) across multiple links, and WAN high availability.

Today there are quite a few manufacturers that have built solid products. However, very few of these manufacturers have bothered to advance their capabilities toward Gen2.

Gen2 SD-WAN is where the customer finally gets control of their network – where the picture becomes carrier agnostic and the fundamental unit of operation is the application and not the network. Gen2 SD-WAN frees the customer from the carrier and includes true application intelligence to allow for a policy language that aligns with business intent – applications, sites, performance, security and compliance – rather than low-level networking rules, IP addresses, ports and coarse traffic categorization.

Fine-grained application intelligence is an important piece of the puzzle. In previous articles, I have shown the difference between configuring policies for accessing Office 365 on a standard router versus an intelligent Gen2 SD-WAN appliance.

Defining is only the first step. You must also consider the maintenance of the solution throughout the business with dozens of SaaS solutions being employed. Routers and Gen1 SD-WAN appliances require the maintenance of access-lists for both access, and QoS of the solution – or, they broadly require you to categorize traffic as Internet-bound or data center bound without the ability to distinguish what the actual application is.

Well, this gets to be a problem when some of the services are integrated with CDNs, or the provider changes IP address spaces to add capacity, or you need to discern between a social network and an Internet SaaS application to adequately prioritize and control. Gen2 natively understands the application and not just from an IP and port perspective.

There is only one manufacturer that has Gen2 figured out. I have worked on CloudGenix systems extensively and they make this part look easy.

SD-LAN is a term that Cisco Systems has coined to highlight their solution that provides an overlay to the access segments of a corporate network. I guess it can be considered to apply as software-defined, since they have separated the layer 2 and layer 3 service logic from the data plane via the use of a controller. It is a VXLAN based overlay that provides the abstraction.

I will tell you this, though: it is a godsend to network engineers everywhere in a corporate environment. Imagine having the same IP address no matter where you plug into on the network! The way that Cisco has extended that to the wireless network as well, is astounding.

As we see these technologies evolve, the entire network landscape will change irreversibly and for the better. I expect soon that we will see advancements being pushed through from the IETF’s work on standards such as Segment Routing, and enhancements to, or better yet, the replacement of BGP.

These advancements in application awareness, service consistency and simplified management will drive better user experience due to an evolving level of intelligence in all layers of the network.


Erik Fritzler is a network and infrastructure architect for H&R Block. Erik has been a networking consultant for over 20 years. He has worked heavily in the retail and service provider markets.

Erik is a senior level technology architect with diverse experience across a wide array of networking technologies and manufacturers. He has performed as primary architect and engineer on both enterprise and service provider networks.

Erik also runs his own consultancy, EFritzler Consulting at

The opinions expressed in this blog are those of Erik Fritzler and do not necessarily represent those of IDG Communications, Inc., its parent, subsidiary or affiliated companies.