* Dr. Internet columnist Steve Blass discusses what Web pages will work with IE 7 * Help Desk columnist Ron Nutter discusses evaluating a wireless application that has all the wireless nodes working in a completely sealed metal enclosure
* What Web pages will or won’t work with Internet Explorer 7?
By Steve Blass
Q: Can you tell me if my older Web application pages will work with Internet Explorer Version 7, coming soon from Microsoft?
A: Microsoft has tentatively scheduled Internet Explorer 7 for release to the automatic update systems at the beginning of November. You can download the release candidate here.
To read Steve’s response in its entirety, please click here.
* Steel-cage wireless networking
By Ron Nutter
Q: I am investigating the use of a wireless network for an application that would have all the wireless nodes working in a completely sealed metal enclosure. The enclosure is maybe a 10′ by 6′ room or smaller and filled with individual networked robotic mechanisms that move around the enclosure. Communications to the enclosure would be through a conventional network over wire. Probably Ethernet. However inside the enclosure the network would fan-out from a gateway to all the robotic mechanisms through a wireless network. It might be 802.11 Wi-Fi but this is really part of the investigation. The unknowns are the performance issues that will arise from the changing positions of the individual robotic units with respect to each other and the access point and as well moving in and around metal obstacles that interfere with signal. We expect lots of multi-path transmission problems as a start. This alone maybe the big problem that make it all a bad way to go. I do not know what else to expect. It may be that wireless is not the best solution for an application such as this?
I need to come up with a way to evaluate this wireless application. If you could help me with any information or direction I would appreciate it very much.
A: I think this is possible. There are a couple of things you might want to look into:
Consider Ethernet, specifically, Power over Ethernet (PoE). This will let you send both power and a network connection over the same cable – one fewer set of wires that you will need to run to and inside the enclosure. Since you are trying to run a sealed enclosure, this will also reduce the chances of a power problem.
To read Ron’s response in its entirety, please click here.
